软管泵污水处理添加絮凝剂输送泵

工业软管泵不锈钢齿轮泵，可输送非润滑油饮料低腐蚀性液体，配铜齿轮可输送汽油苯等低内点液体。由于齿轮泵自吸能力差，一般是由于齿轮泵泵腔间隙较大所致。同时也是如果齿轮泵输出端没有“止回阀”，则必须是下一级齿轮泵的止回阀或控制阀。移动固定后，周围工作人员可恢复手术。

Industrial hose pump stainless steel gear pump, can transport non-lubricant beverages with low corrosive liquids, with copper gears can transport gasoline, benzene and other low internal point liquids. Due to the poor self-priming ability of the gear pump, it is generally caused by the large gap between the pump cavity of the gear pump. At the same time, if there is no "check valve" at the output of the gear pump, it must be a check valve or control valve of the next gear pump. After moving and fixing, the surrounding staff can resume surgery.

不锈钢软管泵的保养：不锈钢泵紧固端面螺栓时，不锈钢泵用力要对称均匀；边紧边盘动转子。若遇到卡涩，不锈钢泵应松掉螺栓重新紧。电泵泵驱动轴不能承受任何径向垂直力，皮带、链条、齿轮等侧向驱动方式禁止使用。底板强的驱动轴与电机轴的连接采用弹性联轴器或链式联轴器。软管泵的齿轮油度要够，不要时间长了泵的底板一软，造成电机与泵不对中而损坏泵。弄清楚泵的允许高转速和现场工作高转速。务必让流体进到入口，尽量不要干转和空转。